Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Assigning Security Names to Groups (SRC CLI)

    For SNMPv1 or SNMPv2c packets, you must assign security names to groups and you must associate a security name with an SNMP community at the [edit snmp v3 snmp-community community-index ] hierarchy level.

    Use the following configuration statements to assign security names to groups:

    snmp v3 vacm security-to-group security-model (v1|v2c|usm) ...
    snmp v3 vacm security-to-group security-model (v1|v2c|usm) security-name security-name { group-name group-name; }

    To map security names to groups for the VACM:

    1. From configuration mode, access the configuration statement that configures the security model for a group.
      user@host# edit snmp v3 vacm security-to-group security-model (v1|v2c|usm)

      To specify the SNMPv1 security model:

      user@host# edit snmp v3 vacm security-to-group security-model v1

      To specify the SNMPv2c security model:

      user@host# edit snmp v3 vacm security-to-group security-model v2c

      To specify the SNMPv3 user-based security model (USM):

      user@host# edit snmp v3 vacm security-to-group security-model usm
    2. Specify the security name.
      user@host# edit snmp v3 vacm security-to-group security-model (v1|v2c|usm) security-name security-name

      If the security model is USM, the security name is the username configured at the [edit snmp v3 usm local-engine user] hierarchy level.

    3. Specify the group to which the security name is assigned.
      [edit snmp v3 vacm security-to-group security-model (v1|v2c|usm) security-name security-name] user@host# set group-name group-name

    Modified: 2013-06-04