Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Configuring Loopback Interfaces for IPv4 (C-Web Interface)
Loopback interfaces are for private use only by software running on the C Series Controller, to communicate with other software also running on the same C Series Controller.
To configure a loopback interface for IPv4:
- Click Configure, expand Interfaces, and then click Interface:
lo.
The Interface: lo pane appears.
- To specify the unit:
- From the Create new list, select Unit.
- In the dialog box, type a number for the new unit, and
click OK.
The Unit: <number> appears in the side pane.
- To specify an IPv4 address for the interface, expand Unit: < number >, and then expand Family in the side pane.
- Click Inet.
The Inet pane appears.
- Click the Create button.
- Enter information as described in the Help text in the main pane, and click Apply.
- Click Inet.
