Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Before You Configure the Redirect Server on a C Series Controller
Before you configure the redirect server on a C Series Controller:
- Configure the connection between the redirect server and
the JunosE router by configuring policies on the C Series Controller:
- Configure and enable the HTTP local server on the JunosE router
- On the C Series Controller, configure a policy that includes
the following policy actions to define which traffic to send to the
redirect server:
- An exception action to specify that an HTTP application receive traffic.
- An http redirect policy action to specify the URL to receive
packets identified in the exception application action.
Note: Alternatively, if the distance between the JunosE routers and the C Series Controller is one hop away, you can configure a next-hop policy on the JunosE router that specifies a destination address that is the virtual IP address of the active redirect server rather than configuring an SRC policy.
- If you plan to configure a redundant redirect server, make sure that you are familiar with the network configuration required.
