Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring an NTP Peer on a C Series Controller (SRC CLI)

    Use the following configuration statements to configure NTP on a C Series Controller to operate in symmetric active mode:

    edit system ntp peer address {version version;prefer;}

    To configure NTP to operate in symmetric active mode:

    1. From configuration mode, access the configuration statement that configures an NTP peer, and specify the IP address or hostname of an NTP peer.
      [edit system ntp]user@host# edit peer address

      For example, to specify an NTP peer that has an IP address of 192.0.2.40:

      [edit system ntp]user@host# edit peer 192.0.2.40 [edit system ntp peer 192.0.2.40]user@host#
    2. (Optional) Specify the version of NTP to be used for outgoing packets.
      [edit system ntp server address ]user@host# set version version
    3. (Optional) If you configure more than one peer, specify whether this server is to be contacted first for synchronization.
      [edit system ntp server address ]user@host# set prefer

    Modified: 2014-06-10