Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Changing the Location of Data in the Directory
In most cases, you use the default configuration for the location of SRC data in the directory:
- Administrator-defined configuration data—ou=staticConfiguration,ou=Configuration,o=Management,o=umc
- Programmatically defined configuration data—ou=dynamicConfiguration,ou=Configuration,o=Management, o=umc
You can specify the full distinguished name (DN), or a DN relative to a base DN, identified as <base>.
You can change the location of data in the directory at the Expert CLI editing level.
Use the following configuration statements to change the location of data for a component in the directory:
slot number component-name initial
{static-dn static-dn ; dynamic-dn dynamic-dn ; }
To change the location of data in the directory:
- From configuration mode, access the configuration statement
that specifies the configuration for a component on a slot.[edit]user@host# edit slot number nic initial
For example:
[edit]user@host# edit slot 0 nic initial - (Optional) Change the location of administrator-defined
configuration data in the directory.[edit slot 0 nic initial]user@host# set static-dn static-dn
- (Optional) Change the location of programmatically defined
configuration data in the directory. [edit slot 0 nic initial]user@host# set dynamic-dn dynamic-dn
