Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Plug-In Attributes for Use with Backbone Congestion Point Expressions

    These plug-in attributes must be available for service authorization and service tracking events.

    accountingId

    • Value of accountingUserId attribute.

    ifRadiusClass

    • RADIUS class attribute on the JunosE interface.
    • Value—String array
    • Example—ifRadiusClass=“acpe”

    ifSessionId

    • Identifier for RADIUS accounting on the JunosE interface.

    interfaceAlias

    • Description of the interface.
    • Value—Interface description that is configured on the JunosE router with the interface ip description command
    • Example—interfaceAlias=“dhcp-subscriber12”

    interfaceDescr

    • Alternate name for the interface that is used by SNMP. This name is a system-generated name.
    • Value
      • On a JunosE router, the format of the description is

        ip<slot>/<port>.<subinterface>

      • On the device running Junos OS, interfaceDescr is the same as interfaceName.
    • Example—interfaceDescr=“IP3/1”

    interfaceName

    • Name of the interface.
    • Value
      • Name of the interface in your router CLI syntax
      • FORWARDING_INTERFACE for routing instance (used by traffic mirroring)
    • Example—For JunosE routers: interfaceName=“fastEthernet6/0”

      For devices running Junos OS: interfaceName=“fe-0/1/0.0”

      For forwarding interface: interfaceName=“FORWARDING_INTERFACE”

    localQosProfiles.<layer name>

    • Local QoS profile in the specified layer. Local QoS profiles refer to profiles that are attached using the JunosE router CLI or the Service Manager and not through a SAE.
    • Value—String
      • The <layer name> is one of the following values: ip, ipv6, lac, svlan, vlan, ethernet, atmVp, atmVc, atm, bridge, frVc, ipTunnel, l2tpTunnel.
    • Example—Specifying “localQosProfiles.vlan” returns the name of the QoS profile in the VLAN layer.

    loginName

    • Subscriber's login name.
    • Value—Login name
    • Guidelines—The format of the login name varies. A loginName can be of form subscriber, domain\subscriber, subscriber@domain, or as otherwise defined by the login setup of the manager.
    • Example—idp@idp

    nasIp

    • IP address of the router.
    • Value—String

    nasPort

    • Numeric identifier that the router uses to identify the interface to RADIUS.
    • Value—Integer

    portId

    • Port identifier of an interface.
    • Value—Includes interface name and additional layer 2 information
    • Example—portId=“fastEthernet 3/1” (There is a space between fastEthernet and slot number 3/1 in the nasPort field.)

    primaryUserName

    • PPP login name or the public DHCP username.
    • Value—Subscriber name
    • Example—primaryUserName=“peter”

    radiusClass

    • RADIUS class attribute of the service definition.
    • Value—String
    • Example—radiusClass=“Premium”

    serviceName

    • Identifier of the service.

    serviceScope

    • Identifier of the service scope.

    serviceSessionName

    • Identifier of the service session.

    serviceSessionTag

    • Tag for the service session.

    sspHost

    • Name of host on which the SAE is installed.

    substitutions.<substitution name>

    • Substitution with the specified name passed in at service activation.

    userIp

    • IP address of the subscriber.
    • Value—String

    userMacAddress

    • Media access control (MAC) address of the DHCP subscriber.
    • Value—Valid MAC address
    • Example—userMacAddress=“00:11:22:33:44:55”

    userType

    • Type of subscriber.

    vrName

    • Name of virtual router.
    • Value—Virtual router name in the format <virtualRouter>@<router>
    • Example—vrName=“default@e_series5”

    Modified: 2014-06-12