Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 
ContentIndex
  
[+] Expand All
[-] Collapse All

 A  C  D  E  F  G  H  I  J  L  M  N  O  P  Q  R  S  T  U  V

 

A

access policy, examples    1
DHCP    
SRC CLI
PPP    
SRC CLI
action threshold, service schedules    
overview
setting    
SRC CLI
actions.     See policy actions    
aggregate services    1
adding    
SRC CLI
before you configure    
SRC CLI
fragment services
infrastructure services
mandatory services
Python expressions
redundancy
sessions    1
activation
attributes
deactivation
modification
monitoring
timers, configuring    
SRC CLI
apply-groups statement, routers running Junos OS
 

C

captive portal    
using with next-hop action    
SRC CLI
classify-traffic condition    1
application protocol    
defining, SRC CLI
map expressions, SRC CLI
application, setting    
SRC CLI
application-group, setting    
SRC CLI
configuring    
SRC CLI
destination grouped network, configuring    
SRC CLI
destination network, configuring    
SRC CLI
expanded classifiers    1
configuring, SRC CLI
extended classifiers    1
configuring, SRC CLI
ICMP conditions, setting    
SRC CLI
IGMP conditions, setting    
SRC CLI
IPSec conditions, setting    
SRC CLI
Junos OS filter conditions, setting    
SRC CLI
JunosE secondary input policy conditions, setting    
SRC CLI
match direction, setting    
SRC CLI    12
multiple classifiers
packet length, setting    
SRC CLI
PCMM I02 and I03    1
configuring, SRC CLI
port definitions, overview    
SRC CLI
protocol conditions with parameters, setting    
SRC CLI
protocol conditions with ports, setting    
SRC CLI
protocol conditions, setting    
SRC CLI
route class, configuring    
SRC CLI
source grouped network, configuring    
SRC CLI
source network, setting    
SRC CLI
TCP conditions, setting    
SRC CLI
term-precedence, setting    
SRC CLI
ToS byte conditions, setting    
SRC CLI
color actions    1
configuring    
SRC CLI
color mark actions    12
controlled load service, FlowSpec
conventions    
notice icons
text
CoS (class of service)    
ToS byte, setting    
SRC CLI
customer support    1
contacting JTAC
 

D

Data-over-Cable Service Interface Specifications.     See DOCSIS    
default policies    
example    
SRC CLI
DHCP (Dynamic Host Configuration Protocol)    
access policy example    
SRC CLI
Differentiated Services code point, ToS byte    
SRC CLI
DOCSIS policy actions    1
configuring    
SRC CLI
documentation    
comments on
drop profile maps    
configuring    
SRC CLI
drop probability, setting    
SRC CLI
fill level, setting    
SRC CLI
DSCP (Differentiated Services code point), ToS byte    
SRC CLI
 

E

effective period, service schedules
exclusions to service schedule    1
defining    
SRC CLI
expanded classifiers    1
configuring    
SRC CLI
expressions    
map, application protocol conditions    
SRC CLI
parameter definitions
extended classifiers, PCMM    1
configuring    
SRC CLI
external parent groups    
JunosE    
overview    12
external parent groups,    
aggregate rate-limit    
configuring
configuration statements
for JunosE policies    
configuration statements
configuring
hierarchical policy parameter    
configuring
JunosE    
creating
rate-limit profiles    
configuring
 

F

filter actions    1
configuring    
SRC CLI
FlowSpec actions    1
configuring    
SRC CLI
forward actions    1
configuring    
SRC CLI
forwarding class actions    1
configuring    
SRC CLI
fragment services    1
configuring    
SRC CLI
 

G

gates, PCMM
gateSpec actions    1
configuring    
SRC CLI
global parameters    1
configuring    
SRC CLI
predefined    1
viewing with SRC CLI
runtime
types
guaranteed service, FlowSpec
 

H

hierarchical policies    
overview    
1
hierarchical rate-limiting    
JunosE    
1
 

I

infrastructure services    123
 

J

Junos OS ASP policy rules    1
NAT actions    1
configuring, SRC CLI
network, specifying    1
SRC CLI    12
stateful firewall actions, configuring    
SRC CLI
Junos OS filter policy rules    1
conditions, setting    
SRC CLI
Junos OS policer policy rules    1
policer actions    1
configuring, SRC CLI
Junos OS port mirror policy rules    
traffic mirror actions
Junos OS scheduler policy rules    12,  See also drop profile maps    
actions    1
configuring, SRC CLI
QoS conditions, configuring    
SRC CLI
Junos OS shaping policy rules
JunosE IPv6 policy rules    
network, specifying    
SRC CLI    12
JunosE secondary input policy rules    
conditions, setting    
SRC CLI
 

L

local parameters    1
configuring    
SRC CLI
types
loss priority actions    1
configuring    
SRC CLI
 

M

manuals    
comments on
map expressions    
application protocol conditions    
SRC CLI
substitutions
mark actions    1
configuring    
SRC CLI
multiple classifiers, policies
multitask
mutex group    1
adding    
SRC CLI
 

N

NAT (Network Address Translation) policies    
actions    1
configuring, SRC CLI
application protocol condition    
defining, SRC CLI
map expressions, SRC CLI
next-hop actions    1
captive portal feature    
SRC CLI
configuring    
SRC CLI
next-interface actions    1
configuring    
SRC CLI
next-rule actions    1
configuring    
SRC CLI
non-real-time polling service.
notice icons
NRTPS (non-real-time polling service)
 

O

operators in substitution expressions
 

P

packet loss priority.     See loss priority actions    
PacketCable Multimedia Specifications.     See PCMM    
parameter names    
substitutions
parameter value acquisition    12,  See also substitutions    
example
multiple subscriptions
single subscriptions
parameter values, setting in services
parameters    1,  See also substitutions    
defining
definition
fixing
global.     See global parameters    
local.     See local parameters    
ranking sources
runtime.     See runtime parameters    
types
parent groups    12345
PCMM policies    
classifiers
client type 1 support
conditions and actions supported
DOCSIS parameters    1
configuring, SRC CLI
extended classifiers    1
configuring, SRC CLI
FlowSpec parameters    
configuring, SRC CLI
controlled load service
guaranteed service
request specification (RSpec)
traffic specification (TSpec)
gate
gateSpec parameters, configuring    
SRC CLI
I02 and I03 classifiers
marking packets
proxied QoS with policy push
service class name    
configuring, SRC CLI
service flow scheduling types
SessionClassId
traffic profiles
permanent service    1
configuring    
SRC CLI
plug-ins    
authorization
policer actions    1
configuring    
SRC CLI
policies    
defining parameters in repository
policing policies    
example    
SRC CLI
policy actions    1
color    1
configuring, SRC CLI
color mark    12
combining
configuring
DOCSIS    1
configuring, SRC CLI
dynamic profiles    
configuring, SRC CLI
filter    1
configuring, SRC CLI
FlowSpec    1
configuring, SRC CLI
forward    1
configuring, SRC CLI
forwarding class    1
configuring, SRC CLI
forwarding instance    
configuring, SRC CLI
gateSpec    1
configuring, SRC CLI
loss priority    1
configuring, SRC CLI
mark    1
configuring, SRC CLI
NAT    1
configuring, SRC CLI
next hop    1
configuring, SRC CLI
next interface    1
configuring, SRC CLI
next rule    1
configuring, SRC CLI
policer    1
configuring, SRC CLI
policy rules supported
QoS profile attachment    1
configuring, SRC CLI
rate limit    1
configuring, SRC CLI
rate limit hierarchy    
overview
parent-group reference, SRC CLI
rate limit types    
configuring, SRC CLI
rate-limit hierarchy    
configuring, SRC CLI    12
reject    1
configuring, SRC CLI
routing instance    1
configuring, SRC CLI
scheduler    1
configuring, SRC CLI
service class name    1
configuring, SRC CLI
stateful firewall    1
configuring, SRC CLI
template activation    
configuring, SRC CLI
traffic class    1
configuring, SRC CLI
traffic mirror    1
configuring, SRC CLI
traffic-shape    1
configuring, SRC CLI
types
user packet class    1
configuring, SRC CLI
policy components    1
policy decision point, description
Policy Editor
policy enforcement point, description
policy engine
policy repository
policy conditions    12,  See also classify-traffic condition    
policy rules supported
types
policy engine
policy examples    
access policy    
SRC CLI
premium service    
SRC CLI
tiered Internet service    
SRC CLI
policy folders    1
configuring    
SRC CLI
policy groups    1
configuring    
SRC CLI
policy lists    1
configuring    
SRC CLI
policy management    
bandwidth management
overview
packet logging
packet mirroring
packet tagging
policy routing
QoS classification and marking
RADIUS support
security
policy objects    
organization
policy overview    
actions.     See policy actions    
conditions.     See classify-traffic condition\    
policy object organization
policy repository, description
policy rules    1
actions supported
conditions supported
configuring    
SRC CLI
Junos Adaptive Services PIC (ASP).     See Junos OS ASP policy rules    
Junos OS filter.     See Junos OS filter policy rules    
Junos OS policer.     See Junos OS policer policy rules    
Junos OS scheduler.     See Junos OS scheduler policy rules    
Junos OS shaping.     See Junos OS shaping policy rules    
precedence    
SRC CLI
types
PPP    
access policy example    
SRC CLI
precedence    
policy rules    
SRC CLI
premium service, example    
SRC CLI
preparation time, service schedules    
overview
setting    
SRC CLI
proxied QoS with policy push
PTSP actions    
PTSP actions, configuring    
SRC CLI
 

Q

QoS (quality of service)    
condition    1
configuring, SRC CLI
PCMM cable networks.     See PCMM policies    
QoS parameters, configuring    
SRC CLI
QoS profile attachment actions    1
configuring, SRC CLI
QoS profile, configuring    
SRC CLI
QoS condition    12
 

R

rate-limit actions    1
configuring    
SRC CLI
example    
SRC CLI
rate-limit hierarchy actions    
configuring    
SRC CLI    12
overview
rate-limit type actions    
configuring    
SRC CLI
rate-limiting, with multiple classifiers
real-time polling service.     See RTPS    
reject actions    1
configuring    
SRC CLI
routers running Junos OS    
policy features    
rate-shaping
routing instance actions    1
configuring    
SRC CLI
RTPS (real-time polling service)    1
configuring    1
SRC CLI
runtime parameters    
viewing with SRC CLI
 

S

scheduleAuth plug-in
scheduler actions    12,  See also drop profile maps    
configuring    
SRC CLI
scopes.     See service scopes    
script services    1
adding    
SRC CLI
example    
ScriptService SPI in Java
ScriptService SPI in Jython
ScriptService interface
service    
3gpp attributes (Gx router driver)    
configuring, SRC CLI
service class name actions    1
configuring    
SRC CLI
service flow scheduling types
service schedules    
action threshold, setting    
SRC CLI
authorization schedules, configuring    
SRC CLI
configuring    
SRC CLI
examples    
SRC CLI    1234
exclusions, defining    
SRC CLI
guidelines
overview    1
action threshold
authorization schedules
configuring
effective period
event-based schedules
exclusions
one-time events
preparation time
recurring events
state-based schedules
planning
preparation time, setting    
SRC CLI
weekly-recur-freq
service scopes    12
adding    
SRC CLI
assigning services    
SRC CLI
assigning subscribers    
SRC CLI
assigning VRs    
SRC CLI
configuring    
SRC CLI
example    
SRC CLI
multiple scopes, defining    
SCR CLI
service-mgm-schedules-nonwork
services    
activate-only
adding aggregate    
SRC CLI
adding infrastructure    
SRC CLI
adding normal    
SRC CLI
adding script services    
SRC CLI
aggregate.     See aggregate services    
assigning to service scopes    
SRC CLI
automatic activation
infrastructure.     See infrastructure services    
mutually exclusive
overview
premium service example    
SRC CLI
restricting availability
restricting simultaneous activation
script.     See script services    
setting parameter values
tiered Internet example    
SRC CLI
SessionClassId, PCMM policies
shaping rate.     See traffic shaping    
stateful firewall policies    
actions    1
configuring, SRC CLI
application protocol conditions    
defining, SRC CLI
map expressions, SRC CLI
substitutions    1,  See also parameters    
aggregate services, configuring
comments    1
adding
definition
exceptions, raising
expressions    12
IPv4 addresses
keywords
lists, formatting
maps, formatting
numbers, formatting
operators
parameter names, specifying
ranges
separators
strings, formatting
subordinate expressions
syntax
formatting
map expressions
mathematical expressions
parameter names
validation
support, technical     See technical support    
 

T

technical support    
contacting JTAC
template activation actions    
configuring    
SRC CLI
text conventions defined
tiered Internet service, example    
SRC CLI
traffic mirror actions    1
configuring    
SRC CLI
traffic profiles, PCMM policies
traffic shape actions    
configuring    
SRC CLI
traffic shaping    
actions
policy rules
traffic-class actions    1
configuring    
SRC CLI
traffic-shape actions
 

U

UGS (unsolicited grant service)    1
configuring    
SRC CLI
UGS-AD (unsolicited grant service with activity detection)    1
configuring    
SRC CLI
unsolicited grant service.     See UGS    
unsolicited grant with activity detection.     See UGS-AD    
user packet class actions    1
configuring    
SRC CLI
 

V

validating    
substitutions
value acquisition for parameters    
multiple subscriptions
single subscriptions

Parameter Types

Global and local parameters are assigned a type. The type indicates the SRC CLI options in which you can use the parameter.

For example, address is a type of parameter. In the SRC CLI, whenever there is an option for which you can specify an IP address, you can use the ? to display a list of all local and global parameters of type address. For example:

user@host# set source-network network ip-address ?
Possible completions: <ip-address> IP address of the source or destination network or host gateway_ipAddress interface_ipAddress service_ipAddress user_ipAddress virtual_ipAddress

There are a few cases in which a global parameter value appears, but because of the context, the value does not make sense to use. For example, in NAT actions, the global parameter any appears in for the IP network setting. In this context, any is not a valid value.

Table 10 lists the parameter types, the predefined parameters for each type, the policy objects in which you can use the parameter type, and how the type is used.

Table 10: Parameter Types

Type

Predefined Parameters

Used In

Used to Specify

address

gateway_ipAddress

interface_ipAddress

service_ipAddress

user_ipAddress

virtual_ipAddress

Classify-traffic condition

Next-interface action

Next-hop action

IP addresses in dotted decimal notation.

addressMask

interface_ipMask

service_ipMask

user_ipMask

Classify-traffic condition

IP masks in dotted decimal notation.

For JunosE policies and Junos OS policies (except for firewall policies), a mask must be equivalent to some prefix length. For example, 255.255.255.0 is allowed, but 255.255.255.1 is not. The software searches this constraint for default parameter values, but not for any other substitution values until runtime when the policy engine constructs the policy.

allowIpOptions

 

Classify-traffic condition

 

any

  

The set of all values.

applicationProtocol

bootp, dce_rpc, dce_rpc_portmap, dns, exec, ftp, h323, green, icmp_app, iiop, netbios, netshow, realaudio, rpc, rpc_portmap, rtsp, shell, snmp, sqlnet, tftp, traceroute, winframe, yellow

Classify-traffic condition

(Predefined parameters map protocol numbers to synonyms.)

 

bandwidthSizeUnit

bps

percent

Policer action

 

boolean

false

true

  

burst

 

Rate-limit action

Policer action

DOCSIS action

Burst sizes. The range is 214—232–1.

color

green

red

yellow

Classify-traffic condition

Color action

Color of action or classifier.

The policy engine validates these values; the substitution engine does not.

dceRpcUuid

 

Classify-traffic condition

 

dropProfileProtocol

any_protocol

non_tcp

tcp_only

Scheduler action

 

dropProfileType

interpolated

segmented

Scheduler action

 

exceptionApplication

http

Exception application actions

The policy rule for traffic that has a specific application, such as a Web server

forwardingClass

 

Classify-traffic condition

QoS condition

 

fragOffset

 

Classify-traffic condition

The value of the fragment offset field of IP packets.

For routers running JunosE software:

  • eq 0—Equal to 0
  • eq 1—Equal to 1
  • gt 1—Greater than 1
  • any—Any value

    For routers running Junos OS and PCMM policies, integer in the range 0–8191.

    The policy engine validates these values; the substitution engine does not.

grantSize

 

DOCSIS action

 

icmpCode

icmpType

 

Classify-traffic condition

8-bit values that represent patterns in the ICMP code and ICMP type fields in IP packets. The policy engine validates these values; the substitution engine does not.

igmpType

 

Classify-traffic condition

8-bit values that represent patterns in the IGMP type field in IP packets. The policy engine validates these values; the substitution engine does not.

interfaceGroup

 

Classify-traffic condition

 

InterfaceSpec

bfwlf

gfwlf

Next-interface action

The router interface.

For JunosE interfaces, the format is:
‘<type of specifier>=<value>’

For example: name=‘fastEthernet3/0’

For Junos OS interfaces, the format is:
‘name= <mediatype>-<slot>/ <pic>/<port>.<unit>’

For example: ‘name=AT-0/1/0.0’

interval

 

DOCSIS action

 

ipFlags

ipFlagsMask

 

Classify-traffic condition

3-bit values that represent patterns for the IP flags field in an IP packet. The high bit is reserved, the middle bit is don’t fragment, and the low bit is more fragments.

ipSecSpi

 

Classify-traffic condition

 

IPv4range

 

 

 

jitter

 

DOCSIS action

 

l2cAccessMode

l2c_access_mode

  

level-aggregation-node

Set to one of the following values:

  • The default value is 0, which means the level-aggregation-node is not configured.
  • 1=Forwarding
  • 2=Vlan
  • 3=Atm
  • 4=Svlan
  • 5=atm-vc
  • 6=atm_vp
  • 7=Ethernet
  • 8=fr-vc
  • 9=ppp-interface

Classify-traffic condition

Parent Group

(Optional) Specifies the level—for example, Forwarding, Vlan, and so on, where the external parent group needs to be grouped for JunosE hierarchical rate-limiting.

level-aggregation-node-id

  • If level-aggregation-node=4 (svlan), this represents the svlanID in the range of 0 through 4095.
  • If level-aggregation-node=6 (atm_vp), this represents the atm-vpId in the range of 0 through 255.

Classify-traffic condition

Parent Group

Specifies the JunosE aggregation node ID. You specify this parameter only if the level-aggregation-node attribute is set to 4 (svlan) or 6 (atm-vp). In this case, it is mandatory to set this attribute.

l2cAccessStreamRate

l2c_access_downstream_rate, l2c_access_upstream_rate, l2c_attainable_downstream_rate, l2c_attainable_upstream_rate, l2c_maximum_downstream_rate, l2c_maximum_upstream_rate, l2c_min_downstream_rate, l2c_min_upstream_rate, l2c_minimum_low_power_downstream_rate, l2c_minimum_low_power_upstream_rate

  

l2cDelay

l2c_actual_interleaving_downstream_delay, l2c_actual_interleaving_upstream_delay, l2c_maximum_interleaving_downstream_delay, l2c_maximum_interleaving_upstream_delay

  

l2cDslStatus

l2c_dsl_line_stat

  

matchDirection

both

input

output

Classify-traffic condition

 

maxLatency

 

DOCSIS action

 

messageType

 

Reject action

 

microSecond

 

 

 

natTranslationType

 

NAT action

 

network

any

Classify-traffic condition

NAT action

IP subnets using two forms:

<address>/<mask>

<address>/<prefixLength>

where <address> and <mask> are in the traditional dotted decimal notation.

<prefixLength>is a number in the range 0–32, which specifies how many of the first bits in the address specify the network.

In policy conditions, network specifies patterns for the address fields in packets. Networks can be preceded by “ not” to indicate that the condition matches every address not in the subnet.

networkOperation

 

Classify-traffic condition

Whether a network field of a packet should match or not match the value specified in a policy condition.

  • 0—Does not match
  • 1—Matches

numeric-aggregation-node

0 through 65,535

The default value of 0 means the numeric-aggregation-node is not configured.

Classify-traffic condition

Parent Group

(Optional) Specifies the JunosE aggregation node numerically in the range of 0 through 65,535.

packetLength

 

Classify-traffic condition

DOCSIS action

FlowSpec action

 

packetLossPriority

any_priority

high_priority

low_priority

Loss priority action

 

packetOperation

 

Rate-limit action

Policer action

Stateful firewall

Actions taken on packets.

For rate-limit actions, valid values are: $’forward’, $’filter’, and $’mark <tosByte> <tosMask>’.

For policer actions, valid values are: filter, forwardingClass, lossPriority.

For stateful firewalls, valid values are: filter, forward, reject.

The policy engine validates these values; the substitution engine does not.

percent

 

Scheduler action

 

policedUnit

 

FlowSpec action

 

port

service_port

Classify-traffic condition

NAT action

16-bit values that represent patterns in the port fields in IP packets.

portOperation

eq

neq

Classify-traffic condition

Whether a port field should match or not match the value(s) specified in a condition. For JunosE policies valid values are: $’eq’, $’lt’, $’gt’, $’neq’ and $’range’.

For Junos OS, the allowed values are:

  • 0—Does not match
  • 1—Matches

    The policy engine validates these values; the substitution engine does not.

prPrecedence

 

Policy rule

 

protocol

ah, egp, esp, gre, icmp, igmp, ip, ipip, ospf, pim, rsvp, tcp, udp

Classify-traffic condition

(Predefined parameters map protocol numbers to synonyms.)

8-bit values that represent patterns in the protocol field in IP packets. The policy engine validates these values; the substitution engine does not.

protocolOperation

is

not

Classify-traffic condition

Whether a protocol field of a packet should match or not match the value specified in a policy condition.

  • 0—Does not match
  • 1—Matches

qosProfileSpec

 

QoS-attachment action

Strings in QoS attachment actions that specify QoS profiles. They can be any string that names a QoS profile on routers running JunosE Software.

rate

interface_speed

Rate-limit action

Policer action

DOCSIS action

FlowSpec action

Traffic-shape action

Rates in the range 0—232–1.

rateLimitType

one_rate

two_rate

Rate-limit action

Rate-limit type. The allowed values are $’one-rate’ and $’two-rate’. The policy engine validates these values; the substitution engine does not.

requestTransmissionPolicy

 

DOCSIS action

 

routingInstance

 

Routing instance action

 

rpcProgramNumber

 

Classify-traffic condition

 

schedulerBufferSize

 

Scheduler action

 

schedulerBufferSizeUnit

buffer_size_percentage

buffer_size_remainder

temporal

Scheduler action

 

schedulerPriority

high

low

medium_high

medium_low

strict_high

Scheduler action

 

schedulerTransmitRate

 

Scheduler action

 

schedulerTransmitRateUnit

rate_in_bps

rate_in_percentage

rate_in_remainder

Scheduler action

 

serviceClassName

 

Service class name action

 

serviceNumber

controlled_load_service

guaranteed_service

FlowSpec action

 

sessionClassIdPriority

 

GateSpec action

 

slackTerm

 

FlowSpec action

 

snmpCommand

get

get_next

set

trap

Classify-traffic condition

 

tcpFlags

tcpFlagsMask

 

Classify-traffic condition

6-bit values that represent patterns for the TCP flags field in IP packets. The bits from high to low mean: urgent, acknowledge, push, reset, synchronize, finish.

timeout

 

Classify-traffic condition

 

tokenBucketSize

 

FlowSpec action

 

tosByte

tosByteMask

 

Classify-traffic condition

Rate-limit action

Mark action

8-bit values that represent patterns in the ToS byte field in IP packets.

When tosByteMask is used in ToS conditions, the allowed values are 0, 224, 252, and 255.

The policy engine validates these values; the substitution engine does not.

traceRouteTtlThreshold

 

Classify-traffic condition

 

trafficClassSpec

 

Traffic-class action

Strings in traffic-class actions that specify traffic-class profiles. They can be any string that names a traffic class on routers running JunosE Software.

trafficPriority

 

DOCSIS action

 

trafficProfileType

best_effort

unsolicited_grant

down_stream

unsolicited_grant_with_activity_detection

real_time

non_real_time

DOCSIS action

Service flow scheduling type

translationType

   

userPacketClass

 

User packet class action

4-bit value. For JunosE policies, valid values are in the range 0–15.

The policy engine validates these values; the substitution engine does not.

Predefined Global Parameters

Table 11 describes the predefined built-in and runtime global parameters that the SRC software provides. Only three of the predefined parameters can be modified: any, bfwlf, and gfwlf.

Table 11: Predefined Global Parameters

Predefined Parameter

Description

Type

Runtime

ah

Maps protocol 51 to AH

protocol

 

any

This network matches any address

network

 

any_priority

Sets packet loss priority to “ any”

packetLossPriority

 

any_protocol

Sets drop profile protocol to “ any”

dropProfileProtocol

 

best_effort

Sets the service flow scheduling type to best effort

trafficProfileType

 

bfwlf

Specifier of the interface that leads to the bronze firewall server

interfaceSpec

Yes

bootp

Specifies the BOOTP protocol

applicationProtocol

 

both

Specifies the direction of the policy as input and output

matchdirection

 

bps

Specifies that the indicated bandwidth size is in bps

bandwidthSizeUnit

 

buffer_size_percentage

Specifies that the indicated buffer size is a percentage

schedulerBufferSizeUnit

 

buffer_size_remainder

Specifies that the indicated buffer size is a remainder

schedulerBufferSizeUnit

 

controlled_load_service

Specifies that the type of FlowSpec service is controlled-load service

serviceNumber

 

dce_rpc

Specifies the DCE RPC protocol

applicationProtocol

 

dce_rpc_portmap

Specifies the DCE RPC portmap

applicationProtocol

 

dns

Specifies the DNS protocol

applicationProtocol

 

down_stream

Sets the service flow scheduling type to downstream

trafficProfileType

 

egp

Maps protocol 8 to EGP

protocol

 

eq

Matches packets with a port that is equal to the specified port

portOperation

 

esp

Maps protocol 50 to ESP

protocol

 

exec

Specifies the Exec protocol

applicationProtocol

 

false

Sets Boolean values to false

boolean

 

ftp

Specifies the FTP protocol

applicationProtocol

 

gateway_ipAddress

IP address of the gateway as specified by the service object

address

Yes

get

Specifies the get SNMP command

snmpCommand

 

get_next

Specifies the get-next SNMP command

snmpCommand

 

gfwlf

Specifier of the interface that leads to gold firewall server

interfaceSpec

Yes

gre

Maps protocol 47 to GRE

protocol

 

green

Specifies the color that indicates a low drop preference

color

Yes

guaranteed

Specifies that the type of FlowSpec service is guaranteed service

serviceNumber

 

h323

Specifies the H.323 protocol

applicationProtocol

 

high

Sets the scheduler priority to high

schedulerPriority

 

high_priority

Sets the packet loss priority (PLP) to high

packetLossPriority

 

icmp

Maps protocol 1 to ICMP

protocol

 

icmp_app

Specifies the ICMP protocol

applicationProtocol

 

igmp

Maps protocol 2 to IGMP

protocol

 

iiop

Specifies the Internet Inter-ORB Protocol, a TCP protocol

applicationProtocol

 

input

Specifies the direction of the policy as input

matchdirection

 

interface_ipAddress

IP address of the interface

address

Yes

interface_ipMask

IP mask of the interface

addressMask

Yes

interface_speed

Speed of the subscriber’s IP interface on the router or the speed of the subscriber’s DOCSIS interface

rate

 

interpolated

Sets the drop profile type to interpolate

dropProfileType

 

ip

Maps protocol 0 to IP

protocol

 

ipip

Maps protocol 4 to IP-IP

protocol

 

is

Matches packets with the protocol that is equal to the specified protocol

protocolOperation

 

l2c_access_downstream_rate

L2C downstream rate

l2cAccessStreamRate

Yes

l2c_access_mode

L2C access mode

l2cAccessMode

Yes

l2c_access_upstream_rate

L2C upstream rate

l2cAccessStreamRate

Yes

l2c_actual_interleaving_downstream_delay

L2C interleaving downstream delay

l2cDelay

Yes

l2c_actual_interleaving_upstream_delay

L2C interleaving upstream delay

l2cDelay

Yes

l2c_attainable_downstream_rate

L2C attainable downstream rate

l2cAccessStreamRate

Yes

l2c_attainable_upstream_rate

L2C attainable upstream rate

l2cAccessStreamRate

Yes

l2c_dsl_line_stat

L2C DSL line status

l2cDslStatus

Yes

l2c_maximum_downstream_rate

L2C maximum downstream rate

l2cAccessStreamRate

Yes

l2c_maximum_interleaving_downstream_delay

L2C maximum interleaving downstream delay

l2cDelay

Yes

l2c_maximum_interleaving_upstream_delay

L2C maximum interleaving upstream delay

l2cDelay

Yes

l2c_maximum_upstream_rate

L2C maximum upstream rate

l2cAccessStreamRate

Yes

l2c_min_downstream_rate

L2C minimum downstream rate

l2cAccessStreamRate

Yes

l2c_min_upstream_rate

L2C minimum upstream rate

l2cAccessStreamRate

Yes

l2c_minimum_low_power_downstream_rate

L2C minimum low power downstream rate

l2cAccessStreamRate

Yes

l2c_minimum_low_power_upstream_rate

L2C minimum low power upstream rate

l2cAccessStreamRate

Yes

low

Sets scheduler priority to low

schedulerPriority

 

low_priority

Sets packet loss priority to low

packetLossPriority

 

medium_high

Sets scheduler priority to medium-high

schedulerPriority

 

medium_low

Sets scheduler priority to medium-low

schedulerPriority

 

neq

Matches packets with a port that is not equal to the specified port

portOperation

 

netbios

Specifies the NetBIOS protocol

applicationProtocol

 

netshow

Specifies the NetShow protocol

applicationProtocol

 

non_real_time

Sets the service flow scheduling type to NRTPS

trafficProfileType

 

non_tcp

Sets the drop profile protocol to any protocol other than TCP

dropProfileProtocol

 

not

Matches packets with the protocol that is not equal to the specified protocol

protocolOperation

 

one_rate

Sets the rate-limit type to one rate

rateLimitType

 

ospf

Maps protocol 89 to OSPF

protocol

 

output

Specifies the direction of the policy as output

matchdirection

 

percent

Specifies that the indicated bandwidth size is a percentage of bandwidth

bandwidthSizeUnit

 

pim

Maps protocol 103 to PIM

protocol

 

rate_in_bps

Specifies that the indicated transmit rate is in bps

schedulerTransmitRateUnit

 

rate_in_percentage

Specifies that the indicated transmit rate is a percentage

schedulerTransmitRateUnit

 

rate_in_remainder

Specifies that the indicated transmit rate is a remainder

schedulerTransmitRateUnit

 

realaudio

Specifies the RealAudio protocol

applicationProtocol

 

real_time

Sets the service flow scheduling type to RTPS

trafficProfileType

 

red

Specifies the color that indicates a high drop preference

color

Yes

rpc

Specifies the RPC UDP or TCP protocols

applicationProtocol

 

rpc_portmap

Specifies the RPC portmap protocol

applicationProtocol

 

rsvp

Maps protocol 46 to RSVP

protocol

 

rtsp

Specifies the Real-Time Streaming Protocol

applicationProtocol

 

sctp

Maps protocol 132 to the Stream Control Transmission Protocol

protocol

 

segmented

Sets the drop profile type to segmented

dropProfileType

 

service_ipAddress

IP address of the service as specified by the service object

address

Yes

service_ipMask

IP mask of the service as specified by the service object

address

Yes

service_port

Service port as specified by the service object

port

Yes

set

Specifies the set SNMP command

snmpCommand

 

shell

Specifies the Shell protocol

applicationProtocol

 

snmp

Specifies the SNMP protocol

applicationProtocol

 

sqlnet

Specifies the SQLNet protocol

applicationProtocol

 

strict_high

Sets scheduler priority to strict-high

schedulerPriority

 

tcp

Maps protocol 6 to TCP

protocol

 

tcp_only

Sets the drop profile protocol to TCP

dropProfileProtocol

 

temporal

Specifies that the indicated buffer size is temporal

schedulerBufferSizeUnit

 

tftp

Specifies the Trivial File Transfer Protocol

applicationProtocol

 

traceroute

Specifies the Traceroute protocol

applicationProtocol

 

trap

Specifies the trap SNMP command

snmpCommand

 

true

Sets the Boolean value to true

boolean

 

two_rate

Sets the rate-limit type to two rate

rateLimitType

 

udp

Maps protocol 17 to UDP

protocol

 

unsolicited_grant

Sets the service flow scheduling type to UGS

trafficProfileType

 

unsolicited_grant_with_activity_detection

Sets the service flow scheduling type to UGS-AD

trafficProfileType

 

user_ipAddress

IP address of the subscriber

address

Yes

user_ipMask

IP mask of the subscriber

address

Yes

virtual_ipAddress

Virtual portal address of the SSP that is used in redundant SAE installations

address

Yes

winframe

Specifies the WinFrame protocol

applicationProtocol

 

yellow

Specifies the color that indicates a medium drop preference

color

Yes

Naming Global Parameters

A global parameter is stored in the directory with the parameter name as its naming attribute. The directory stores the case for the parameter name; however, the directory does not allow you to create another global parameter with a name that differs only by the use of upper and lowercase letters. For example, if there is a parameter named fastspeed, the directory will not allow the creation of a parameter named fastSpeed without first deleting fastspeed.

Also, when you define a substitution for a global parameter, make sure that the case in the substitution matches the case of the global parameter.

 

Related Documentation

Modified: 2015-06-19