Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation  Back up to About Overview 
ContentIndex
  

 C  D  I  M  N  R  S  T

 

C

commands to manage    
IPMI    
C3000/C5000
conventions    
notice icons
text
customer support    1
contacting JTAC
 

D

documentation    
comments on
 

I

IPMI    
configuring    12
local chassis information    
viewing
overview
power status of local controller    
viewing    12
powering controller    
local controller
remote controller
remote chassis information    
viewing
user account    
configuring    12
deleting
renaming
viewing
user accounts    
viewing
IPMI SOL    1
connecting
disconnecting
 

M

manuals    
comments on
 

N

notice icons
 

R

remote user
 

S

serial over LAN
SRC CLI    
IPMI Sensor Data Repository information
support, technical     See technical support    
 

T

technical support    
contacting JTAC
text conventions defined

Powering a Remote Controller On and Off Using IPMI (SRC CLI)

You can power on or off, and reset a remote C Series Controller.

To execute a power command on a remote controller using IPMI:

  1. Log in to the C Series Controller.
  2. Enter the request ipmi host user power command.

    Note: The request ipmi host user power command is not supported, if the SRC software is deployed as a virtual machine.

    user@host>request ipmi host host user user power (on | off | soft-off | reset| cycle)

    where:

    • host—IP address of the remote IPMI module.
    • user—IPMI user account name.

    For example:

    user@host>request ipmi host 10.10.10.30 user johndoe power reset
  3. When prompted, enter the IPMI password configured on the remote system.

Related Documentation

Modified: 2015-06-23