Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Disabling an SRC Component

    On a C Series Controller, you can disable a module or component that is running from the CLI.

    To disable a component:

    1. Verify which components are running by entering the show component command in operation mode:
      user@host> show component 
      Installed Components
      Name      Version                                            Status
      cli       Release: 7.0 Build: CLI.A.7.0.0.0171               running 
      acp       Release: 7.0 Build: ACP.A.7.0.0.0174               disabled
      jdb       Release: 7.0 Build: DIRXA.A.7.0.0.0176             running 
      editor    Release: 7.0 Build: EDITOR.A.7.0.0.0176            disabled
      redir     Release: 7.0 Build: REDIR.A.7.0.0.0176             disabled
      licSvr    Release: 7.0 Build: LICSVR.A.7.0.0.0179            stopped 
      nic       Release: 7.0 Build: GATEWAY.A.7.0.0.0170           disabled
      sae       Release: 7.0 Build: SAE.A.7.0.0.0166               running 
      www       Release: 7.0 Build: UMC.A.7.0.0.0169               disabled
      jps       Release: 7.0 Build: JPS.A.7.0.0.0172               disabled
      agent     Release: 7.0 Build: SYSMAN.A.7.0.0.0174            disabled
      webadm    Release: 7.0 Build: WEBADM.A.7.0.0.0173            disabled
    2. Disable a component by using the disable component command in operational mode. For example:
      user@host> disable sae

    Published: 2014-12-09