Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Starting the SRC SNMP Agent (C-Web Interface)

    You must configure the SNMP agent and then manually start the agent. If you attempt to manually start the SNMP agent before it is configured, the software displays a message that the agent has not been configured and cannot start.

    The SNMP agent automatically restarts in the event of a host reboot or process failure that stops the agent.

    Before you start the SRC SNMP agent:

    1. Perform the initial configuration tasks on the C Series Controller.
    2. Configure the SRC SNMP agent.

      See Configuring the SRC SNMP Agent (C-Web Interface).

    Manually start the SRC SNMP agent the first time it runs. Thereafter, the agent automatically restarts.

    To start the SNMP agent:

    1. Click Manage>Enable.
    2. From the Component box, select agent.

    The system responds with a start message. If the SNMP agent is already running, the system responds with a warning message indicating that fact.

    Published: 2014-12-10