Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Powering a Remote Controller On and Off Using IPMI (SRC CLI)

    You can power on or off, and reset a remote C Series Controller.

    To execute a power command on a remote controller using IPMI:

    1. Log in to the C Series Controller.
    2. Enter the request ipmi host user power command.
      user@host>request ipmi host host user user power (on | off | soft-off | reset| cycle)


      • host—IP address of the remote IPMI module.
      • user—IPMI user account name.

      For example:

      user@host>request ipmi host user johndoe power reset
    3. When prompted, enter the IPMI password configured on the remote system.

    Published: 2014-12-10