Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring the Subscriber Type (SRC CLI)

    Use the following configuration statements to configure the subscriber type:

    shared gw-3gpp configuration subscriber-types (session-handle) {subscriber-id-type (session-handle);nic-proxy nic-proxy;}

    To configure the subscriber type:

    1. From configuration mode, access the statement that configures the subscriber type.
      user@host# edit shared gw-3gpp configuration subscriber-types session-handle)
    2. Specify the subscriber ID type.

      Note: The only subscriber ID type supported is session-handle.

      edit shared gw-3gpp configuration subscriber-types session-handleuser@host# set subscriber-id-type session-handle)
    3. Specify the namespace that defines the properties for the NIC proxy operations for the specified subscriber ID type. Each subscriber type must use a different NIC proxy. In this sample procedure, the namespace for the NIC proxy called nic2 is configured.
      edit shared gw-3gpp configuration subscriber-types session-handle user@host# set nic-proxy nic2
    4. (Optional) Verify your configuration.
      [edit shared configuration subscriber-types session-handle] 
      user@host# show
      nic-proxy nic2;
      subscriber-id-type session-handle;

    Published: 2014-12-10