Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Initial Properties for the SRC SNMP Agent (SRC CLI)

    Use the following configuration statements to configure initial properties for the SRC SNMP agent:

    snmp agent initial { base-dn base-dn; host-id host-id; }

    To configure properties for the SRC SNMP agent:

    1. From configuration mode, access the configuration statement that configures the SRC SNMP agent.
      [edit]user@host# edit snmp agent initial
    2. Specify the DN of the directory used for the SRC SNMP agent configuration data.
      [edit snmp agent initial] user@host# set base-dn base-dn
    3. Identifies the system management configuration in the directory server that provides the remaining configuration for the SRC SNMP agent.
      [edit snmp agent initial] user@host# set host-id host-id

      If the entry does not exist, the entry and the subentries for the components and traps is automatically created in the system management configuration.

    4. (Optional) Verify your configuration.
      [edit snmp agent initial] 
      user@host# show 
      base-dn o=UMC;
      host-id POP-ID;
      directory-connection { 
       url ldap://;
        principal cn=sysman,ou=components,o=operators,<base>;
        credentials ********;
      directory-eventing { 

    Published: 2014-12-10