Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring the Remote Diameter Peer (SRC CLI)

    Use the following configuration statements to configure the remote Diameter peer:

    slot number ims aracf-rq peer name { address address; port port; origin-host origin-host; watchdog-timeout watchdog-timeout; incoming-queue-limit incoming-queue-limit; }

    To configure the remote Diameter peer:

    1. From configuration mode, access the statement that configures the Diameter peer. In this sample procedure, the remote SPDF peer called primary-spdf is configured.
      user@host# edit slot 0 ims aracf-rq peer primary-spdf
    2. (Optional) Specify the IP address of the remote peer.
      [edit slot 0 ims aracf-rq peer primary-spdf] user@host# set address address
    3. (Optional) Specify the port of the remote peer.
      [edit slot 0 ims aracf-rq peer primary-spdf] user@host# set port port
    4. (Optional) Specify the Diameter identifier for the remote endpoint that is the originator of the Diameter message.
      [edit slot 0 ims aracf-rq peer primary-spdf] user@host# set origin-host origin-host
    5. (Optional) Specify the watchdog timeout of the connection to the remote peer.
      [edit slot 0 ims aracf-rq peer primary-spdf] user@host# set watchdog-timeout watchdog-timeout
    6. (Optional) Specify the size of the incoming message queue before the system rejects messages.
      [edit slot 0 ims aracf-rq peer primary-spdf] user@host# set incoming-queue-limit incoming-queue-limit
    7. (Optional) Verify your configuration.
      [edit slot 0 ims aracf-rq peer primary-spdf] 
      user@host# show 
      address 127.0.0.1;
      origin-host testclient;

    Published: 2014-12-10