Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Global SNMP Communities in the SRC Software (SRC CLI)

    You can configure global default SNMP communities that are used if a VR does not exist on the router or if the community strings have not been configured for the VR.

    Use the following configuration statements to configure global default SNMP communities:

    shared sae configuration driver snmp {read-only-community-string read-only-community-string; read-write-community-string read-write-community-string;}

    To configure global default SNMP communities:

    1. From configuration mode, access the statements that configure default SNMP communities.
      user@host# edit shared sae configuration driver snmp
    2. Configure the default SNMP community string used for read access to the router.
      [edit shared sae configuration driver snmp] user@host# set read-only-community-string read-only-community-string
    3. Configure the default SNMP community string used for write access to the router.
      [edit shared sae configuration driver snmp] user@host# set read-write-community-string read-write-community-string
    4. (Optional) Verify your configuration.
      [edit shared sae configuration driver snmp]
      user@host# show 
      read-only-community-string ********;
      read-write-community-string ********;

    Published: 2014-12-10