Adding Virtual Router Objects (SRC CLI)

Use the following configuration statements to add a virtual router:

To add a virtual router:

1. From configuration mode, access the statements for virtual routers. You must specify the name of a device with lowercase characters. This sample procedure uses proxy_device as the name of the router object. For third-party devices, use the name default for the virtual router.
   user@host# edit shared network device proxy_device virtual-router default
2. Specify the addresses of SAEs that can manage this router. This step is required for the SAE to work with the router.
   [edit shared network device proxy_device virtual-router default] user@host# set sae-connection [ sae-connection ...]

   To specify the active SAE and the redundant SAE, enter an exclamation point (!) after the hostname or IP address of the connected SAE. For example:

   [edit shared network device proxy_device virtual-router default]user@host# set sae-connection [sae1! sae2!]
3. (Optional) Specify an SNMP community name for SNMP read-only operations for this virtual router.
   [edit shared network device proxy_device virtual-router default] user@host# set snmp-read-community snmp-read-community
4. (Optional) Specify an SNMP community name for SNMP write operations for this virtual router.
   [edit shared network device proxy_device virtual-router default] user@host# set snmp-write-community snmp-write-community
5. (Optional) Specify service scopes assigned to this virtual router. The scopes are available for subscribers connected to this virtual router for selecting customized versions of services.
   [edit shared network device proxy_device virtual-router default] user@host# set scope [ scope ...]
6. (Optional) Specify the plug-ins that track interfaces that the SAE manages on this virtual router.
   [edit shared network device proxy_device virtual-router default] user@host# set tracking-plug-in [ tracking-plug-in ...]
7. (Optional) Verify your configuration.

   [edit shared network device proxy_device virtual-router default] 
   user@host# show 
   sae-connection 10.8.221.45;
   snmp-read-community ********;
   snmp-write-community ********;
   scope POP-Toronto;
   tracking-plug-in flexRadius;