Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Configuration Tasks for Integrating Third-Party Network Devices (C-Web Interface)
To integrate third-party devices into your SRC network, complete the following tasks:
- Write a script and add a script service that references the script.
- Add objects for the devices.
- Configure an SAE community.
- (Optional) Configure SAE properties for the event notification
API if you are using the event notification method to log in subscribers.
See Configuring SAE Properties for the Event Notification API (C-Web Interface).
- Configure the session store.
- If you are using the event notification method to log
in subscribers, integrate the SAE with an IP address manager. There
are two ways to do so:
- Use the event notification API to create an application
that notifies the SAE when events occur between the DHCP server and
the network device.
See the event notification API documentation in the SAE CORBA remote API documentation on the Juniper Networks Web site at
https://www.juniper.net/techpubs/software/management/src/api-index.html
- Use Monitoring Agent, an application that was created
with the event notification API and that monitors DHCP or RADIUS messages
for DHCP or RADIUS servers.
See the SRC Sample Applications Guide.
- Use the event notification API to create an application
that notifies the SAE when events occur between the DHCP server and
the network device.
