Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring PTSP Policy Lists (SRC CLI)

    Note: For PTSP you must:

    • Set the role of the policy list to junos-ptsp
    • Set the policy list rule type to ptsp-service-rule
    • Set the policy list applicability option to both
    • Create a policer instance.

    Use the following configuration statements to PTSP policy lists:

    policies group name list name {role [(junos | junose-ipv4 | junose-ipv6 | junose-l2tp | pcmm | aaa | junos-ise | junos-ptsp)];applicability [(input | output | both | secondary-input)];description description;}

    To configure policy lists:

    1. From configuration mode, create a policy list. For example, to create a policy list called list1 within a policy group called group1:
      user@host# edit policies group group1 list list1
    2. Specify the role of the policy list. For PTSP the role must be set to junos-ptsp.
      [edit policies group group1 list list1] user@host# set role junos-ptsp
    3. Specify where the policy is applied on the device. For PTSP the applicability option must be set to both.
      [edit policies group group1 list list1] user@host# set applicability both

    Published: 2014-12-10