Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Protocol Conditions for PTSP Classify-Traffic Conditions (SRC CLI)

    The procedure in this topic shows how to configure protocol conditions that do not include port conditions.

    Use the following configuration statements to add general protocol conditions to a PTSP classify-traffic condition:

    policies group name list name rule name traffic-condition name protocol-condition {protocol protocol; }

    To add general protocol conditions to a classify-traffic condition:

    1. From configuration mode, enter the general protocol condition configuration. For example:
      user@host# edit policies group group1 list list1 rule rule1 traffic-condition condition1 protocol-condition
    2. Configure the protocol matched by this classify-traffic condition.
      [edit policies group group1 list list1 rule rule1 traffic-condition condition1 protocol-condition]user@host# set protocol protocol

      Enter the protocol matched by this classifier list, one of the following values:

      • Predefined global parameter—Use a ? at the command line to see a list of valid protocols.
      • Protocol number in the range 0–255.
      • String expression.
      • Parameter of type protocol.
    3. (Optional) Verify your protocol condition configuration.
      [edit policies group group1 list list1 rule rule1 traffic-condition condition1 protocol-condition]
      user@host# show 
      protocol 0;
      

    Published: 2014-12-10