TechLibrary

Table of Contents

Guide That Contains This Content

[+] Expand All

[-] Collapse All

Configuring NAT Actions (C-Web Interface)

You can configure NAT actions for Junos OS ASP policy rules. To configure a NAT action:

In the side pane, select a Junos OS ASP policy rule.
From the Create new list, select NAT. Type a name for the action, and click OK.
Enter information as described in the Help text in the main pane, and click Apply.
To configure the port range to restrict port translation when the NAT translation type is configured in dynamic-source mode:
1. In the side pane, select Port.
2. Click create, and enter information as described in the Help text in the main pane, and click Apply.
To configure the IP address ranges.
1. In the side pane, select IP Network.
2. In the main pane, click Create.
3. In the side pane, expand IP Network, and select Group Network.
4. Click Create, enter information as described in the Help text in the main pane, and click Apply.