Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Mark Actions (SRC CLI)

    Use this action to mark packets. You can configure mark actions for JunosE and PCMM policy rules.

    The type of action that you can create depends on the type of policy rule. See Policy Information Model.

    Note: If you configure more than one mark action in a rate limit, for example, for a committed, conformed, or exceed action, configure the same mask for each action. If you use different masks, the results can be unpredictable.

    Use the following configuration statements to configure a mark action:

    policies group name list name rule name mark {description description ; }
    policies group name list name rule name mark info {value value ; mask mask ; }

    To configure a mark action:

    1. From configuration mode, enter the mark action configuration.
      user@host# edit policies group junose list mark rule pr mark
    2. (Optional) Enter a description for the mark action.
      [edit policies group junose list mark rule pr mark]user@host# set description description
    3. (Optional) Configure the mark value.
      [edit policies group junose list mark rule pr mark]user@host# set info value value
    4. (Optional) Configure the mark mask.
      [edit policies group junose list mark rule pr mark]user@host# set info mask mask

      Supported values for the mask are 224 for precedence bits, 252 for DS bits, and 255 to mask all bits.

    5. (Optional) Verify the mark action configuration.
      [edit policies group junose list mark rule pr mark]
      user@host# show 
      info {
        mark-value 10;
        mask 255;
      }
      description "Mark action";

    Published: 2014-12-10