Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
Configuring Initial Directory Eventing Properties for SRC Components
You can use the default configuration for directory eventing properties, or you can change the configuration to comply with your environment.
The following configuration statements configure initial directory eventing properties for a component:
slot number sae initial directory-eventing {eventing; signature-dn signature-dn ; polling-interval polling-interval ; event-base-dn event-base-dn ; dispatcher-pool-size dispatcher-pool-size ;}
To change directory eventing configuration:
- From configuration mode, access the configuration statement
that specifies the initial eventing configuration for a component
on a slot.[edit]user@host# edit slot number component initial directory-eventing
For example:
[edit]user@host# edit slot 0 nic initial directory-eventing - (Optional) Specify an interval at which an SRC component
polls the directory to check for directory changes. [edit slot 0 nic initial directory-eventing]user@host# set polling-interval polling-interval
- (Optional) Specify the DN of an entry superior to the
data associated with an SRC component in the directory.[edit slot 0 nic initial directory-eventing]user@host# set event-base-dn event-base-dn
- (Optional) Specify the number of events that an SRC component
can receive simultaneously from the directory. [edit slot 0 nic initial directory-eventing]user@host# set dispatcher-pool-size dispatcher-pool-size
For information about the default setting for the directory eventing properties, see the SRC PE CLI Command Reference.
