Adding Objects for Network Devices (SRC CLI)

For each network device that the SAE manages, add a router object and virtual router object.

Use the following configuration statements to add a router object:

To add a router object:

1. From configuration mode, access the statements that configure network devices. You must specify the name of a device with lowercase characters. This sample procedure uses proxy_device as the name of the router.
   user@host# edit shared network device proxy_device
2. (Optional) Add a description for the router object.
   [edit shared network device proxy_device] user@host# set description description
3. (Optional) Add the IP address of the router object.
   [edit shared network device proxy_device] user@host# set management-address management-address
4. Set the type of device that you are adding to third-party.
   [edit shared network device proxy_device] user@host# set device-type third-party
5. (Optional) Verify your configuration.

   [edit shared network device proxy_device] 
   user@host# show 
   description "Third-party router";
   management-address 192.168.9.25;
   device-type third-party;
   interface-classifier {
    rule rule-0 {
       script #;
     }
   }

Related Documentation

• Adding Objects for Network Devices (C-Web Interface)
• Configuration Tasks for Integrating Third-Party Network Devices (SRC CLI)
• Adding Virtual Router Objects (SRC CLI)
• Integrating Network Devices into the SRC Network Overview
• Logging In Subscribers and Creating Sessions