Creating Grouped Configurations for SRC ACP (SRC CLI)

We recommend that you configure SRC ACP within a group. When you create a configuration group, the software creates a configuration with default values filled in.

Configuration groups allow you to share the SRC ACP configuration with different SRC ACP instances in the SRC network. You can also set up different configurations for different instances.

You can then create a grouped SRC ACP configuration that is shared with some SRC ACP instances. For example, if you create two different SRC ACP groups called config1 and config2 within the shared SRC ACP configuration, you could select the SRC ACP configuration that should be associated with a particular SRC ACP instance.

Use the shared option of the slot number acp statement to select the group for an SRC ACP instance as part of the local configuration. Use the shared acp group name statements to configure the group.

To select and configure a group:

  1. From configuration mode, select a group for an SRC ACP instance. For example, to select a group called config1 in the path /:
    [edit]user@host# set slot 0 acp shared /config1

    For more information, see Configuring Local Properties for SRC ACP (SRC CLI).

  2. Commit the configuration.
    [edit]user@host# commit commit complete.
  3. From configuration mode, configure a group. For example, to configure a group called config1, specify the group as part of the SRC ACP configuration.
    user@host# edit shared acp group config1 ? 
    Possible completions:
      <[Enter]>            Execute this command
    > configuration
    > congestion-point-classifier
    > group                Group of ACP configuration properties
      |                    Pipe through a command

    For more information, see Configuring SRC ACP (SRC CLI).

Related Documentation