Configuring Access to Policy Data (SRC CLI)

Use the following configuration statements to configure access to policy data:

To configure SAE access to subscriber data:

1. From configuration mode, access the configuration statement that configures SAE access to policy data in the directory. In this sample procedure, the policy data is configured in the se-region group.
   user@host# edit shared sae group se-region configuration ldap policy-data
2. Specify the subtree in the directory in which policy data stored.
   [edit shared sae group se-region configuration ldap policy-data] user@host# set policy-dn policy-dn
3. Specify the subtree in the directory in which policy parameter data is cached.
   [edit shared sae group se-region configuration ldap policy-data] user@host# set parameter-dn parameter-dn
4. (Optional) Enable or disable automatic discovery of changes to policy data.
   [edit shared sae group se-region configuration ldap policy-data] user@host# set directory-eventing
5. Set the frequency for checking the directory for updates.
   [edit shared sae group se-region configuration ldap policy-data] user@host# set polling-interval polling-interval
6. (Optional) Verify your configuration.

   [edit shared sae group se-region configuration ldap policy-data]
   user@host# show 
   policy-dn o=Policy,<base>;
   parameter-dn o-Parameters,<base>;
   directory-eventing;
   polling-interval 30;

Related Documentation

• Creating Grouped Configurations for the SAE (SRC CLI)
• Configuring Access to Subscriber Data (SRC CLI)
• Configuring Access to Service Data (SRC CLI)
• Configuring Access to the Persistent Login Cache (SRC CLI)
• SRC Access to Directory Data