Configuring Access to Service Data (SRC CLI)

Use the following configuration statements to configure access to service data:

To configure SAE access to service data:

1. From configuration mode, access the configuration statement that configures SAE access to service data in the directory. In this sample procedure, the service data is configured in the se-region group.
   user@host# edit shared sae group se-region configuration ldap service-data
2. (Optional) Specify the directory server that stores service data.
   [edit shared sae group se-region configuration ldap service-data] user@host# set server-address server-address
3. Specify the subtree in the directory where service data is cached.
   [edit shared sae group se-region configuration ldap service-data] user@host# set dn dn
4. (Optional) Specify the DN that the SAE uses to authenticate access to the directory server.
   [edit shared sae group se-region configuration ldap service-data] user@host# set authentication-dn authentication-dn
5. (Optional) Specify the password used to authenticate access to the directory server.
   [edit shared sae group se-region configuration ldap service-data] user@host# set password password
6. (Optional) Enable or disable automatic discovery of changes to service data.
   [edit shared sae group se-region configuration ldap service-data] user@host# set directory-eventing
7. Set the frequency for checking the directory for updates.
   [edit shared sae group se-region configuration ldap service-data] user@host# set polling-interval polling-interval
8. Enable LDAPS as the secure protocol for connections to the server that stores service data.
   edit shared sae group se-region configuration ldap service-data] user@host# set ldaps
9. (Optional) Verify your configuration.

   [edit shared sae group se-region configuration ldap service-data]
   user@host# show 
   server-address 10.10.45.3;
   dn <base>;
   authentication-dn <base>;
   password ********;
   directory-eventing;
   polling-interval 30;
   ldaps;

Related Documentation

• Creating Grouped Configurations for the SAE (SRC CLI)
• Configuring Access to Subscriber Data (SRC CLI)
• Configuring Access to Policy Data (SRC CLI)
• Configuring Access Through LDAPS to Service and Subscriber Data (SRC CLI)