Configuring Simulated Router Drivers (SRC CLI)

You configure a simulated router in the same way that you configure a real router.

Before you configure a simulated router driver:

Use the following configuration statements to configure simulated router drivers:

shared sae configuration driver simulated name {driver-type (junos | junose | pcmm); router-version router-version ; driver-address driver-address ; transport-router transport-router ; }

To configure simulated router drivers:

  1. From configuration mode, access the configuration statement that configures simulated router drivers. In this sample procedure, west-region is the name of the SAE group, and default@simjunos is the name of the simulated router driver.
    [edit]user@host# edit shared sae group west-region configuration driver simulated default@simJunos
  2. Configure the type of device that the simulated driver simulates.
    [edit shared sae group west-region configuration driver simulated default@simJunos] user@host# set driver-type (junos | junose | pcmm)
  3. (Optional) Configure the version of the router software to simulate. This is the software version that is sent by the router.
    [edit shared sae group west-region configuration driver simulated default@simJunos] user@host# set router-version router-version
  4. Configure the IP address of the device driver.
    [edit shared sae group west-region configuration driver simulated default@simJunos] user@host# set driver-address driver-address
  5. (Optional) Configure the name of a virtual router that is used to connect to the SAE. This value is passed to the router initialization script. It is not supported on the device running Junos OS.
    [edit shared sae group west-region configuration driver simulated default@simJunos] user@host# set transport-router transport-router
  6. (Optional) Verify the configuration of the simulated driver.
    [edit shared sae group west-region configuration driver simulated default@simJunos]
    user@host# show
    driver-type junos;
    router-version 8.4;
    driver-address 10.10.90.5;

For information about setting up SAE groups, see Configuring an SAE Group.

Related Documentation