Configuring System Information for the SRC SNMP Agent (SRC CLI)

Use the following configuration statements to configure information supplied by the SRC SNMP agent:

snmp { contact contact;name name;location location;description description;address [address...]; }

To configure properties for the SRC SNMP agent:

  1. From configuration mode, access the configuration statement that configures the SRC SNMP agent.
    [edit]user@host# edit snmp
  2. (Optional) Specify the administrative contact for the system being managed by SNMP.
    [edit snmp] user@host# set contact contact
  3. (Optional) Specify the name of the system being managed by SNMP.
    [edit snmp] user@host# set name name
  4. (Optional) Specify the location of the system being managed by SNMP.
    [edit snmp] user@host# set location location
  5. (Optional) Specify the description of the system being managed by SNMP.
    [edit snmp] user@host# set description description
  6. (Optional) Specify the listening address on which to receive incoming SNMP requests.
    [edit snmp] user@host# set address [address...]

    To list more than one IP address, enter the addresses separated by spaces within brackets. By default, the SRC SNMP agent listens on all IPv4 interfaces.

  7. (Optional) Verify your configuration.
    [edit snmp] 
    user@host# show 

    If you did not configure the SNMP agent, the command displays only the SRC SNMP agent configuration.

Related Documentation