Stopping the SRC Software

To gracefully shut down the SRC software and power off the system, in operational mode, enter the following command:

user@host> request system halt

This command stops all system components, halts the operating system, and powers down the C Series Controller.

Note: The request system halt command does not give you the opportunity to restart the system from the CLI.

For example:

user@host> request system halt 
Halt the system [yes,no] ? (no) y
BroadcaStopping HAL daemon: [  OK  ]
Stopping system message bus: [  OK  ]
Stopping atd: [  OK  ]
Shutting down xfs: [  OK  ]
Stopping sshd:[  OK  ]
Shutting down smartd: [  OK  ]
Stopping snmpd: [  OK  ]
Stopping xinetd: [  OK  ]
Stopping acpi daemon: [  OK  ]
Stopping crond: [  OK  ]
Stopping autofs:  [  OK  ]
Stopping nscd: [  OK  ]
Shutting down ntpd: [  OK  ]
Stopping NFS statd: [  OK  ]
Stopping irqbalance: [  OK  ]
Stopping portmap: [  OK  ]
Shutting down kernel logger: [  OK  ]
Shutting down system logger: [  OK  ]
Stopping pcmcia:  unloading Kernel Card Services
[  OK  ]
Stopping sysstat:  [  OK  ]
Starting killall:  [  OK  ]
Sending all processes the TERM signal... 
Sending all processes the KILL signal... 
Saving random seed:  
Syncing hardware clock to system time 
Turning off swap:  
Turning off quotas:  
Unmounting pipe file systems:  
Unmounting file systems:  
Halting system...
md: stopping all md devices.
md: md0 switched to read-only mode.
Synchronizing SCSI cache for disk sda: 
Power down.
acpi_power_off called

Related Documentation