Configuring the Subscriber Type (SRC CLI)

Use the following configuration statements to configure the subscriber type:

shared gw-3gpp configuration subscriber-types (session-handle) {subscriber-id-type (session-handle);nic-proxy nic-proxy;}

To configure the subscriber type:

From configuration mode, access the statement that configures the subscriber type.
user@host# edit shared gw-3gpp configuration subscriber-types session-handle)
Specify the subscriber ID type.
Note: The only subscriber ID type supported is session-handle.
edit shared gw-3gpp configuration subscriber-types session-handleuser@host# set subscriber-id-type session-handle)
Specify the namespace that defines the properties for the NIC proxy operations for the specified subscriber ID type. Each subscriber type must use a different NIC proxy. In this sample procedure, the namespace for the NIC proxy called nic2 is configured.
edit shared gw-3gpp configuration subscriber-types session-handle user@host# set nic-proxy nic2

(Optional) Verify your configuration.

[edit shared configuration subscriber-types session-handle] 
user@host# show
nic-proxy nic2;
subscriber-id-type session-handle;