Configuring the Local Diameter Peer (SRC CLI)

Use the following configuration statements to configure the local Diameter peer:

slot number ims aracf-rq { protocol protocol; port port; address address; origin-host origin-host; origin-realm origin-realm; }

To configure the local Diameter peer:

From configuration mode, access the statement that configures the Diameter peer.
user@host# edit slot 0 ims aracf-rq
(Optional) Specify the protocol used for the transport layer.
[edit slot 0 ims aracf-rq] user@host# set protocol protocol
(Optional) Specify the port used for incoming connections.
[edit slot 0 ims aracf-rq] user@host# set port port
(Optional) Specify the IP address of the local peer.
[edit slot 0 ims aracf-rq] user@host# set address address
(Optional) Specify the Diameter identifier for the local endpoint that is the originator of the Diameter message.
[edit slot 0 ims aracf-rq] user@host# set origin-host origin-host
(Optional) Specify the Diameter identifier for the realm of the local endpoint that is the originator of the Diameter message.
[edit slot 0 ims aracf-rq] user@host# set origin-realm origin-realm

(Optional) Verify your configuration.

[edit slot 0 ims aracf-rq] 
user@host# show 
protocol tcp;
port 3868;
address 127.0.0.1;
origin-host testserver;
origin-realm testrealm;
peer 1 {
  address 127.0.0.1;
  origin-host testclient;
}

Configuring the Local Diameter Peer (SRC CLI)

Related Documentation