Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Starting the SRC Client on a JunosE Router

    JunosE routers use an SRC client to interact with the SAE. See JunosE Broadband Access Configuration Guide for complete information about configuring the SRC client on a JunosE router.

    To start the SRC client:

    1. Access the router CLI.
    2. Access Global configuration mode.
      host1# configure terminal
    3. Switch to the virtual router for which you want to create an SRC client.
      host1(config)#virtual-router <vrName>
    4. Enable the SRC client.

      To enable COPS-PR mode:

      host1:<vrName>(config)#sscc enable cops-pr

      To enable COPS-XDR mode:

      host1:<vrName>(config)#sscc enable
    5. Set the primary address from the configuration directory.
      host1:<vrName>(config)#sscc primary address <ipAddress> port 3288

    Published: 2014-06-19