Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Powering the Local Controller On and Off Using IPMI (SRC CLI)

    You can power on or off, and reset the C Series Controller you are currently logged in to.

    To execute a power command in the local controller using IPMI:

    1. Log in to the C Series Controller.
    2. Enter the request ipmi power command.
      user@host>request ipmi power (on | off | soft-off | reset| cycle)
      • on—Power on a C Series Controller.
      • off—Power off a C Series Controller. This command does not initiate a clean shutdown of the operating system before powering off the system.
      • soft-off—Power off a C Series Controller softly. This command initiates a soft shutdown of the operating system before powering off the system.
      • reset—Perform a hard reset on a C Series Controller.
      • cycle—Power off and then power on a C Series Controller.

      For example:

      user@host>request ipmi power off

    Published: 2014-06-06