Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Adding Objects for Network Devices (SRC CLI)
For each network device that the SAE manages, add a router object and virtual router object.
Use the following configuration statements to add a router object:
shared network device name {description description; management-address management-address; device-type (junose| junos| pcmm| third-party); qos-profile [qos-profile...];}
To add a router object:
- From configuration mode, access the statements that configure
network devices. You must specify the name of a device with lowercase
characters. This sample procedure uses proxy_device as the name of
the router. user@host# edit shared network device proxy_device
- (Optional) Add a description for the router object. [edit shared network device proxy_device] user@host# set description description
- (Optional) Add the IP address of the router object. [edit shared network device proxy_device] user@host# set management-address management-address
- Set the type of device that you are adding to third-party. [edit shared network device proxy_device] user@host# set device-type third-party
- (Optional) Verify your configuration.
[edit shared network device proxy_device] user@host# show description "Third-party router"; management-address 192.168.9.25; device-type third-party; interface-classifier { rule rule-0 { script #; } }
