Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Access to Service Data (SRC CLI)

    Use the following configuration statements to configure access to service data:

    shared sae configuration ldap service-data {server-address server-address ; dn dn; authentication-dn authentication-dn ; password password ; directory-eventing; polling-interval polling-interval ; (ldaps); }

    To configure SAE access to service data:

    1. From configuration mode, access the configuration statement that configures SAE access to service data in the directory. In this sample procedure, the service data is configured in the se-region group.
      user@host# edit shared sae group se-region configuration ldap service-data
    2. (Optional) Specify the directory server that stores service data.
      [edit shared sae group se-region configuration ldap service-data] user@host# set server-address server-address
    3. Specify the subtree in the directory where service data is cached.
      [edit shared sae group se-region configuration ldap service-data] user@host# set dn dn
    4. (Optional) Specify the DN that the SAE uses to authenticate access to the directory server.
      [edit shared sae group se-region configuration ldap service-data] user@host# set authentication-dn authentication-dn
    5. (Optional) Specify the password used to authenticate access to the directory server.
      [edit shared sae group se-region configuration ldap service-data] user@host# set password password
    6. (Optional) Enable or disable automatic discovery of changes to service data.
      [edit shared sae group se-region configuration ldap service-data] user@host# set directory-eventing
    7. Set the frequency for checking the directory for updates.
      [edit shared sae group se-region configuration ldap service-data] user@host# set polling-interval polling-interval
    8. Enable LDAPS as the secure protocol for connections to the server that stores service data.
      edit shared sae group se-region configuration ldap service-data] user@host# set ldaps
    9. (Optional) Verify your configuration.
      [edit shared sae group se-region configuration ldap service-data]
      user@host# show 
      server-address 10.10.45.3;
      dn <base>;
      authentication-dn <base>;
      password ********;
      directory-eventing;
      polling-interval 30;
      ldaps;

    Published: 2014-06-19