Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Destination Grouped Networks for PTSP Classify-Traffic Conditions (SRC CLI)

    Use the following configuration statements to add destination networks in a grouped format to a classify-traffic condition:

    policies group name list name rule name traffic-condition name destination-network group-network {network-specifier network-specifier; }

    To add a grouped destination network to a classify-traffic condition:

    1. From configuration mode, enter the destination network within a classify-traffic condition. For example:
      user@host# edit policies group group1 list list1 rule rule1 traffic-condition condition1 destination-network group-network
    2. (Optional) Configure the IP address of the destination network or host.

      [edit policies group group1 list list1 rule rule1 traffic-condition condition1 destination-network group-network]user@host# set network-specifier network-specifier
    3. (Optional) Verify your destination network configuration.
      [edit policies group group1 list list1 rule rule1 traffic-condition condition1 destination-network group-network] 
      user@host# show 
      network-specifier any;

    Published: 2014-06-25