Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Configuring Protocol Conditions with Parameters (C-Web Interface)
Before you assign a parameter for the protocol, you must create a parameter of type protocol and commit the parameter configuration.
To configure a protocol condition that contains a parameter value for the protocol:
- In the side pane, select a policy rule.
- From the Create new list, expand a traffic condition, and select Parameter Protocol Condition.
- Click Create, enter information as described in the Help text in the main pane, and click Apply.
- (Optional) To configure protocol attributes:
- In the side pane, expand Parameter Protocol Condition, and select Proto Attr.
- Click Create, enter information as described in the Help text in the main pane, and click Apply.
To configure source and destination ports:
- In the side pane, expand Proto Attr>Source Port, and select Port.
- Click Create, enter information as described in the Help text in the main pane, and click Apply.
- In the side pane, expand Proto Attr>Destination Port, and select Port.
- Click Create, enter information as described in the Help text in the main pane, and click Apply.