Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
Specifying Which NTP Server a C Series Controller Contacts on Startup
When you boot a C Series Controller, it issues an ntpdate request, which polls a network server to determine the local date and time. Configure a server that the system uses to determine the time when the system boots. Otherwise, NTP cannot synchronize with a time server if the server’s time is very far off the local system’s time.
To configure the NTP boot server:
- From configuration mode, access the configuration statement
that configures NTP.[edit]user@host# edit system ntp
- Specify the address or hostname of the network NTP server.[edit system ntp]user@host# set boot-server address
For example:
[edit system ntp]user@host# set boot-server 192.0.2.20