Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Related Documentation
Configuring an NTP Peer for a C Series Controller (C-Web Interface)
To configure NTP to operate as a peer:
- Click Configure, expand System, and then click NTP.
The NTP pane appears.
- In the Create new list, select Peer. Type an IPv4 or IPv6 address for the server and click OK.
- Enter information as described in the Help text in the
main pane, and click Apply.
Note: If the remote system has authentication enabled, specify an authentication key and value. The system transmits the specified authentication key when transmitting packets.