Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring NTP Client Mode for a C Series Controller (SRC CLI)

    Use the following configuration statements to configure NTP on a C Series Controller to operate in client mode:

    system ntp server address{version version;prefer;}

    To configure NTP to operate in client mode:

    1. From configuration mode, access the configuration statement that configures an NTP server, and specify the IP address or hostname of an NTP server.
      [edit system ntp]user@host# edit server address

      For example, to specify an NTP server that has an IP address of 192.0.2.30:

      [edit system ntp]user@host# edit server 192.0.2.30 [edit system ntp server 192.0.2.30]user@host#
    2. (Optional) Specify the version of NTP to be used for outgoing packets.
      [edit system ntp server address ]user@host# set version version
    3. (Optional) If you configure more than one time server, specify whether this server is to be contacted first for synchronization.
      [edit system ntp server address ]user@host# set prefer

    Published: 2014-06-12