Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Resolution Information for a NIC Proxy (SRC CLI)

    Use the following statements to configure resolution information for a NIC proxy:

    nic-proxy-configuration name resolution {resolver-name resolver-name; key-type key-type; value-typevalue-type; expect-multiple-values; constraints constraints; }

    To configure resolution information for a NIC proxy:

    1. From configuration mode, access the configuration statement that specifies the NIC proxy configuration.
      [edit]user@host# component-hierarchy nic-proxy-configuration name resolution

      For example:

      [edit]user@host# edit shared sae configuration nic-proxy-configuration ip resolution
    2. Specify the NIC resolver that this NIC proxy uses.
      [edit shared sae configuration nic-proxy-configuration ip resolution]user@host# set resolver-name resolver-name

      This resolver must be the same as one that is configured on the NIC host. For example:

      [edit shared sae configuration nic-proxy-configuration ip resolution]user@host# set resolver-name /realms/ip/A1
    3. Specify the NIC data type that the key provides for the NIC resolution.
      [edit shared sae configuration nic-proxy-configuration ip resolution]user@host# set key-type key-type

      For example:

      [edit shared sae configuration nic-proxy-configuration ip resolution]user@host# set key-type ip

      To qualify data types, enter a qualifier within parentheses after the data type; for example, to specify username as a qualifier for the key LoginName:

      [edit shared sae configuration nic-proxy-configuration ip resolution]user@host# set key-type LoginName (username)
    4. Specify the type of value to be returned in the resolution for the application that uses the NIC proxy.
      [edit shared sae configuration nic-proxy-configuration ip resolution]user@host# set value-type value-type

      For example:

      [edit shared sae configuration nic-proxy-configuration ip resolution]user@host# set value-type SaeId
    5. (Optional) If the key can have more than one value, specify that the key can have multiple corresponding values.
      [edit shared sae configuration nic-proxy-configuration ip resolution]user@host# set expect-multiple-values
    6. (Optional. Available at the Advanced editing level.) If the application provides a constraint in the resolution request, specify the data type for the constraint. The constraint represents a condition that must or may be satisfied before the next stage of the resolution process can proceed.
      [edit shared sae configuration nic-proxy-configuration ip resolution]user@host# set constraints constraints

    Published: 2014-06-19