Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Changing the Location of Data in the Directory

    In most cases, you use the default configuration for the location of SRC data in the directory:

    • Administrator-defined configuration data—ou=staticConfiguration,ou=Configuration,o=Management,o=umc
    • Programmatically defined configuration data—ou=dynamicConfiguration,ou=Configuration,o=Management, o=umc

    You can specify the full distinguished name (DN), or a DN relative to a base DN, identified as <base>.

    You can change the location of data in the directory at the Expert CLI editing level.

    Use the following configuration statements to change the location of data for a component in the directory:

    slot number component-name initial {static-dn static-dn ; dynamic-dn dynamic-dn ; }

    To change the location of data in the directory:

    1. From configuration mode, access the configuration statement that specifies the configuration for a component on a slot.
      [edit]user@host# edit slot number nic initial

      For example:

      [edit]user@host# edit slot 0 nic initial
    2. (Optional) Change the location of administrator-defined configuration data in the directory.
      [edit slot 0 nic initial]user@host# set static-dn static-dn
    3. (Optional) Change the location of programmatically defined configuration data in the directory.
      [edit slot 0 nic initial]user@host# set dynamic-dn dynamic-dn

    Published: 2014-06-12