Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Subscriber IP Pools as IP Subnets (SRC CLI)

    To configure subscriber IP pools that are managed by the CMTS device as IP subnets:

    1. From configuration mode, access the configuration statement that configures the CMTS device to which the JPS can connect.
      user@host# edit slot 0 jps cmts-registry cmts cmts-ip subnet-pool subnet

      Specify the IP address of the CMTS device and the IP address and mask of the subnet for the pool of subscriber IP addresses.

    2. (Optional) Specify the IP addresses of the subnet that are excluded from the subscriber IP pool managed by the CMTS device.
      [edit slot 0 jps cmts-registry cmts cmts-ip subnet-pool subnet] user@host# set exclude [exclude...]
    3. (Optional) Verify your configuration.
      [edit slot 0 jps cmts-registry] 
      user@host# show 

    Published: 2014-06-25