Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Configuring Subscriber IP Pools as IP Address Ranges (SRC CLI)
To configure subscriber IP pools that are managed by the CMTS device as IP address ranges:
- From configuration mode, access the configuration statement
that configures the CMTS device to which the JPS can connect. user@host# edit slot 0 jps cmts-registry cmts cmts-ip range-pool pool-index
Specify the IP address of the CMTS device and the address range pool index.
- Specify the first IP address in the IP range for the pool
of subscriber IP addresses that are managed by the CMTS device. [edit slot 0 jps cmts-registry cmts cmts-ip range-pool pool-index] user@host# set low low
- Specify the last IP address in the IP range for the pool
of subscriber IP addresses that are managed by the CMTS device. [edit slot 0 jps cmts-registry cmts cmts-ip range-pool pool-index] user@host# set high high
- (Optional) Verify your configuration.
[edit slot 0 jps cmts-registry] user@host# show
