Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring IPMI (SRC CLI)

    For the C3000 and C5000 models, an IPMI configuration includes an IP address assigned to the IPMI interface and a gateway IP address.

    Use the following configuration statements to configure an IPMI interface on a C Series Controller:

    system ipmi {address address;gateway gateway;user name;}

    To configure IPMI on an interface:

    1. From configuration mode, access the configuration statement that configures an IPMI interface.
      user@host# edit system ipmi
    2. Set the IP address.
      [edit system ipmi]user@host# set address address/destination prefix

      An IP address is required for both the C3000 and C5000 models.

    3. Set the default gateway IP address. A default gateway is a node on a network that serves as an access point to another network.
      [edit system ipmi]user@host# set gateway gateway
    4. Verify the configuration.
      [edit system ipmi]user@host# showaddress 10.227.7.145/24;gateway 10.227.7.1;

    Published: 2014-06-06