Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Parameter Values Used by Services for Exceptions to Stateless Firewalls
Table 1 lists the parameters for which Enterprise Manager Portal provides values. The parameter names start with “fw” (service’s LDAP attribute parameterSubstitution). The services listed in Before You Configure Services for Enterprise Manager Portal use these parameters.
Table 1: Parameters for Stateless Firewall Services for Enterprise Manager Portal
To Specify This Value | Use This Parameter |
|---|---|
Protocol | fwProtocol |
Source network | fwSrcIp |
Source port | fwSrcPort |
Destination network | fwDestIp |
Destination port | fwDestPort |
TOS byte | fwTosByte |
TOS byte mask | fwTosByteMask |
TCP flags | fwTcpFlags |
TCP flags mask | fwTcpFlagsMask |
IP flags | fwIpFlags |
IP flags mask | fwIpFlagsMask |
Fragmentation offset | fwIpFragOffset |
ICMP type | fwIcmpType |
ICMP code | fwIcmpCode |
Packet length | fwPacketLength |
