Specifying JunosE Router Initialization Scripts on the SAE (SRC CLI)

Use the following configuration statements to specify router initialization scripts for JunosE routers:

shared sae configuration driver scripts {extension-path extension-path ; general general ; junose-pr junose-pr ; junose-xdr junose-xdr ; }

To configure router initialization scripts for JunosE routers:

  1. From configuration mode, access the configuration statements that configure router initialization scripts. In this sample procedure, the scripts are configured in the west-region group.
    user@host# edit shared sae group west-region configuration driver scripts
  2. Specify the script for JunosE routers when the JunosE driver uses COPS-PR mode when connecting to the SAE.
    [edit shared sae group west-region configuration driver scripts] user@host# set junose-pr junose-pr
  3. Specify the script for JunosE routers when the JunosE driver uses COPS-XDR mode when connecting to the SAE.
    [edit shared sae group west-region configuration driver scripts] user@host# set junose-xdr junose-xdr

    In COPS-XDR mode, the router does not send the network access server (NAS) IP address to the SAE. If your configuration requires this value, add the following line to a JunosE script:

    import ERXnasip
  4. Configure a router initialization script that can be used for all types of routers that the SRC module supports.
    [edit shared sae group west-region configuration driver scripts] user@host# set general general
  5. Configure a path to router initialization scripts that are not in the default location, /opt/UMC/sae/lib.
    [edit shared sae group west-region configuration driver scripts] user@host# set extension-path extension-path
  6. (Optional) Verify your router initialization script configuration.
    [edit shared sae group west-region configuration driver scripts]
    user@host# show 
    junose-xdr poolPublisher;

Related Documentation