Assigning Security Names to Groups (SRC CLI)

For SNMPv1 or SNMPv2c packets, you must assign security names to groups and you must associate a security name with an SNMP community at the [edit snmp v3 snmp-community community-index ] hierarchy level.

Use the following configuration statements to assign security names to groups:

snmp v3 vacm security-to-group security-model (v1|v2c|usm) ...
snmp v3 vacm security-to-group security-model (v1|v2c|usm) security-name security-name { group-name group-name; }

To map security names to groups for the VACM:

  1. From configuration mode, access the configuration statement that configures the security model for a group.
    user@host# edit snmp v3 vacm security-to-group security-model (v1|v2c|usm)

    To specify the SNMPv1 security model:

    user@host# edit snmp v3 vacm security-to-group security-model v1

    To specify the SNMPv2c security model:

    user@host# edit snmp v3 vacm security-to-group security-model v2c

    To specify the SNMPv3 user-based security model (USM):

    user@host# edit snmp v3 vacm security-to-group security-model usm
  2. Specify the security name.
    user@host# edit snmp v3 vacm security-to-group security-model (v1|v2c|usm) security-name security-name

    If the security model is USM, the security name is the username configured at the [edit snmp v3 usm local-engine user] hierarchy level.

  3. Specify the group to which the security name is assigned.
    [edit snmp v3 vacm security-to-group security-model (v1|v2c|usm) security-name security-name] user@host# set group-name group-name

Related Documentation