Configuring the Subscriber Type (SRC CLI)

Use the following configuration statements to configure the subscriber type:

shared gw-3gpp configuration subscriber-types (session-handle) {subscriber-id-type (session-handle);nic-proxy nic-proxy;}

To configure the subscriber type:

  1. From configuration mode, access the statement that configures the subscriber type.
    user@host# edit shared gw-3gpp configuration subscriber-types session-handle)
  2. Specify the subscriber ID type.

    Note: The only subscriber ID type supported is session-handle.

    edit shared gw-3gpp configuration subscriber-types session-handleuser@host# set subscriber-id-type session-handle)
  3. Specify the namespace that defines the properties for the NIC proxy operations for the specified subscriber ID type. Each subscriber type must use a different NIC proxy. In this sample procedure, the namespace for the NIC proxy called nic2 is configured.
    edit shared gw-3gpp configuration subscriber-types session-handle user@host# set nic-proxy nic2
  4. (Optional) Verify your configuration.
    [edit shared configuration subscriber-types session-handle] 
    user@host# show
    nic-proxy nic2;
    subscriber-id-type session-handle;

Related Documentation