Configuring Logging Destinations to Send Messages to the System Logging Facility (SRC CLI)

Use the following configuration statements to configure system logging for the SRC 3GPP gateway:

slot number gw-3gpp logger name ...
slot number gw-3gpp logger name syslog { facility facilityfilter filter; format format; host host; port port; }

To configure logging destinations to send log messages to the system logging facility:

  1. From configuration mode, access the statement that configures the name and type of logging destination. In this sample procedure, the logging destination called log2 is configured.
    user@host# edit slot 0 gw-3gpp logger log2 syslog
  2. Specify the properties for the logging destination.
    [edit slot 0 gw-3gpp logger log2 syslog] user@host# set ?

    For more information about configuring properties for the logging destination, see Configuring System Logging (SRC CLI).

  3. (Optional) Verify your configuration.
    [edit slot 0 gw-3gpp logger log2 syslog] 
    user@host# show 

Related Documentation